Set of 4 Chrome Performance Oval Pod Filters - 54mm - Honda CB650/750/900/1000

Description

Set of 4 Chrome Performance Oval Pod Filters - 54mm - Honda CB650/750/900/1000/1100
Tapered oval performance pod filter in chrome. Fits many late 70''s and early 80''s Honda''s as well as other models, see dimensions below. Sold as a set of 4. This filter is also available in all black.
Features
Flexible rubber molded flange instead of the 2 piece design like many pod filters.
Flange design has no step so it does not block important openings on the carburetor intake.
Tighter, more streamline fit without any risk of vibration causing the air filter to move independently while attached to the carburetors.
Keep in mind, for the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow. The rubber mounts are flexible and can be mounted on 53mm and 55mm carburetor flanges.
IMPORTANT:
Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn''t mean they''ll fit in the bike without some obstruction. Some carburetors have very tight spacing which will not allow for a 73mm wide pod filter to fit side by side.
Dimensions:
54mm ID where it mounts to the carburetors
70mm Air filter length
86mm Total length including rubber
73mm Width of oval
104mm Height of oval
Fitment note: Honda changed from mechanical to CV carburetors on the CB650. CV carburetors have a tight spacing that may not work with these pods, see measurements above.
Fits Honda:
CB650 - 1981-1982 - Mechanical carbs / does not fit CV carbs
CB650 Custom - 1981 - Mechanical carbs / does not fit CV carbs
CB650SC Nighthawk - 1982 - Mechanical carbs / does not fit CV carbs
GL650I Silver Wing Interstate - 1983
CB750C Custom - 1980-1982
CB750F Super Sport - 1979-1982
CB750K - 1979-1982
CB750K Limited Edition - 1979
CB750SC Nighthawk - 1982-1983
CB900C Custom - 1980-1982
CB900F Super Sport - 1981-1982
CB1000C Custom - 1983
CBX Super Sport - 1979-1982
CB1100F Super Sport - 1983
Fits Kawasaki:
1982-1985 GPZ750
1981-1983 KZ1000J
1981-1982 KZ1000K LTD
1981-1982 KZ1000M CSR
1982-1999 KZ1000P POLICE
1982-1983 KZ1000R
1981-1983 KZ1100A
1981-1982 KZ1100B GPZ
1982-1983 KZ1100D SPECTRE
1983 KZ1100L LTD
1980-1982 KZ750E
1980 KZ750F LTD
1980-1983 KZ750H LTD
1983 KZ750L
1982-1983 KZ750N SPECTRE
1987 ZL1000 ELIMINATOR
1984-1985 ZN1100B LTD
1983-1985 ZX750
Fits Suzuki:
1985-1986 GS700
1985 GS750E,
1980-1985 GS750
1983 GS750E
1983 GS750ES
1979-1983 GS850G
1980-1983 GS850GL
1983-1986 GS1150E
1983 GS1100S
1980 GS1100L
1982-1984 GS1100GK
1982-1983 GS1100G
1980-1983 GS1100E
1980-1982 GS1000S
1980-1981 GS1000GL
1980-1981 GS1000G
Fits Yamaha:
1978-1983 XS1100
1995-1999 XJR1200
2000 XJR1300
NOTE: Fits other model bikes as well. Check your carburetor flange diameter before purchase.
4into1motorcycleparts
•
Store Policies